The design begins with a robustly constructed 12 gauge steel Yoke and A-frame leg. These legs are connected with 7-inch high spanning rails to form the heart of the agile center deck and power-data raceway. 2” box tubing is cradled in the outboard locations of the yoke to provide a solid foundation for adding the cantilevered worksurfaces. The structural design integrity enables a single segment. This bench is to support in excess of 4000 pounds of weight.
The base is a top-down leveling system. Each individual leg extends up to 2” from the yoke eliminating unsightly floor glides.
The surfaces are composed of high-pressure plastic laminate and backing sheets bonded to either a 27 mm double refined MDF edged with a water based sealer or 1⅛” industrial grade particleboard edged with thermally fused polymer edge banding.
The power raceway is factory assembled and ETL listed to the appropriate industry standards in accordance with the US and Canadian Electrical code. The Power components conform specifically to UL STD 1286 and certified for electrical safety to CSA, STD C22.2 NO. 203.
Screens are constructed of a fiberboard core covered with 100% recycled and recyclable textiles. Screens are vertically mounted using a concealed thru-bolt connection to a flat infill for placement on the bench.
Power Access and Technology Slots
Openings in the Infill Components are finished with an ABS plastic liner.
Metal flex covering conduit, 8-wire. The metal flex cable provides electromagnetic isolation near low voltage telecom cables. Outlets: molded polycarbonate simplex pre-configured as circuit 1, 2, 3G, 4. Power Feed: Metal-flex covering – Galvanized steel. All circuits rated for 20 AMPs.
Local Electrical Codes
Consult a qualified electrical contractor or engineer for the proper installation of all electrical components. In accordance with NEC2011 Article 210, the permissible load should not exceed 80% of the circuit ampere rating (which is 16 amps on each 20 amp branch circuit).
- Table: 128”W x 53”D x 29”H
- Screen Height: 14”H
- Storage Box: 15”W x 15”D x 14”H